Operation method:
1. Insert PC as the default XINPUT mode; LED3 stays on
2.Plug SWITCH The host automatically recognizes as SWITCH, and the host assigns the lights
3.In XINPUT mode, long press VIB key for 2s to switch to Dinput mode, LED2 is on continuously
4. While the controller is off, press and hold the "L1" key, then plug in the USB to the PS3 host. For PS3 mode, the host is assigned an indicator
5.PC-USB upgrade: Press L3 in the shutdown state and insert the PC-USB to enter the upgrade state, open the upgrade software and upgrade the handle software according to the operation steps.
Technical parameters :
1.Matching current 30 ~ 60mA
2.Shutdown current below 30uA
3.The charging current is 200 ~ 300mA.
Turbo speed adjustment:
1.Turbo speed increase: Turbo + cross key Up;
2.Turbo speed reduction: Turbo + cross key Down
3.The speed is divided into 8Hz, 12Hz, 15Hz; the default is 12Hz; no indicator light is required
In SWITCH mode, in the online state, you can press and hold the four keys R, L, ZR, and ZL at the same time to perform motor strength scheduling, divided into three levels: strong, medium and weak.